Home > Car Culture >  

Inside A Nitro Burning Top Fuel Engine: The Most Extreme Environment on Earth

An In-Depth Look At The Inside Of A Top Fuel Engine!

Where are pressures higher than on Venus and temps hotter than liquid lava? Inside a Top Fuel motor where bearings get flattened and valve springs collapse under enormous pressures lasting just a few seconds.

Let take a look inside, from a safe distance, and see how a 50 year-old engine design is able to produce and survive these incredible forces.


The Engine Block

First, a quick primer on the motor. It’s based on the architecture of the 1964 Chrysler Hemi “Elephant” race motor, including bore centers. Every piece is custom-made for a Top Fuel motor and is either computer-craved out of solid billet aerospace aluminum or fabricated via another exacting process to aviation standards.

As the bore centers have been established by the rules, the only way to increase displacement is to eliminate the water jackets, which is exactly what engine builders have done. The engine is cooled primarily by the five gallons of a nitromethane/alcohol mixture the engine consumes in less than a four second run.


The Fuel

Nitromethane fuel is an extremely dangerous, volatile compound that – handled carefully – makes for a great drag racing fuel. The amount of air required for gasoline to burn is 14:1 (air to gasoline) , but since nitromethane fuel carries its own oxygen, it can burn at a ratio of less than 2:1 (air to nitro). As each  cylinder is limited in capacity for each stroke, 8.7 times more nitromethane than gasoline can be burned in one stroke, generating about 2.3 times the power of gasoline. In essence, running a normal 200 hp gasoline engine on nitro would generate 460 hp, at least for a brief time, and then the motor would ingest itself in a most spectacular fashion.

The village of Mount Pulaski, IL recovers from a deadly nitromethane tank car explosion in 1958. It was reported that one person was never found and assumed to have been vaporized by the explosion.

Nitromethane was used primarily as a commercial solvent and wasn’t assumed to be explosive, until a tank car explosion in Mount Pulaski, IL on January 22, 1958 that killed two, injured 60 and left thousands homeless. Oddly enough, midget and drag racers knew of the explosive properties of Nitro in the late 1940s.

The Blower

Based inside our engine, the air/fuel mixture is ramming 60 psi of the air/fuel mixture  into the engine by an updated version of the 14-71 Roots supercharger. Despite the fact that its basic design goes back to the 1800s and was further developed by GM for its diesel locomotives, it remains the  design of choice (and rules). Oh, and just driving the supercharger requires between 700 and 900 hp depending upon who you ask (more than a Hellcat produces). Think about that: if you were to drive a Top Fuel blower with a separate engines, one of the few street engines that produce enough power to do so is the Hellcat.

An updated version of the Roots 14-71 design upgraded for the rigors of Top Fuel drag racing.

The Spark Plugs

The air/fuel mixture is ignited by two 14 mm spark plugs per cylinder (one of the few design deviations from the Generation II 426 Hemi). These plugs are fired by two 44 amp magnetos, enough to power an arc welder. The spark plugs are completely burnt out and not longer functioning by mid run – fuel is ignited by the heat of the combustion chamber alone.

The spark plug on the left is brand new, the spark plug on the right has just a few seconds on it. Talk about low mileage service intervals!

The Combustion Chamber

There’s a measure of engine combustion efficiency that engineers utilize, particularly to compare the efficiency (ability to generate force out of the burning of the fuel) of one engine to another. It’s called Brake Mean Effective Pressure (BMEP). A Formula 1 car is estimated to generate about 230 psi of BMEP, meaning that on every power stroke, the force of combustion pushing down on the piston is 230 psi. That’s a great deal of force.

A Top Fuel engine generates a BMEP of 1450 psi, making the combustion chamber one of the most inhospitable environments in the solar system.  Venus, the planet with the highest atmospheric pressure, where spacecrafts’ lives are measured in minutes or seconds before they’re crushed by the dense atmosphere (the record is 110 minutes), is 1334  psi. Scientists say a human would last about 10 seconds on Venus before imploding. Rough neighborhood.

Venus is not a friendly place, but better than inside a Top Fuel engine.


The Exhaust

There’s an incredible velocity of hot gases streaming out of the exhaust headers, but at least part of it is put to work. While the exhaust headers can reach 1,800 degrees F (BTW, aluminum melts at 1,200 F and liquid lava ranges from about 1,300 to 2,200 degrees F), the force of the exhaust gases are directed upward to generate up to 800 lbs of drag-free downforce.

The Brains

Computerized controls are not allowed, so engine advance is adjusted by a timer, as is clutch actuation, to manage wheel spin, because at any point, the engine produces more horsepower than the tires can handle. In fact, there’s so much heat and friction as the clutch plates progressively engine, they can actually weld themselves together. What a crazy ride that must be.

The timer package that alters the ignition curve and clutch engagement during a run.



About Chris Riley

I have been wrecking cars for as long as I've been driving them, but I keep coming back for more. Two wheels or four, I'm all in. I founded GearHeads.org and then built and ran AutoWise.com until selling it to Lola Digital Media in 2020. I look forward to watching AutoWise grow as part of the AllGear group.